Idrac Direct Led Indicator Codes; Nic Indicator Codes - Dell VxRail E660 Installation And Service Manual

Hide thumbs Also See for VxRail E660:
Table of Contents

Advertisement

iDRAC Quick Sync 2 indicator
code
Solid amber
Blinking amber

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or
tablet. Cable length should not exceed 3 feet (0.91 meters). Performance could be affected by cable quality. The following table
describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 2. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two
seconds
Blinking green (on for
two seconds and off for
two seconds)
LED Indicator off

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED
indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 3. NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Table 3. NIC indicator codes
NIC indicator codes
Link and activity indicators are off.
Link indicator is green, and activity indicator is blinking
green.
Condition
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Corrective action
If the problem persists, see the
section.
OpenManage Server Administrator User's Guide
at https://www.dell.com/openmanagemanuals.
Restart the system.
If the problem persists, see the
Restart the system.
If the problem persists, see the
Condition
Indicates that the NIC is not connected to the network.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is being sent or received.
System diagnostics and indicator codes
Support
www.dell.com/poweredgemanuals
Support
Support
or Dell
section.
section.
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vxrail e660fVxrail e660n

Table of Contents