Verify The Battery And Reset The Time And Date; Removing System Battery; Installing System Battery - Dell EMC VxFlex Ready Node R840 Manual

Verify the battery and reset the time and date

Figure 68 Removing system battery
3. To install a new system battery, hold the battery with the positive side facing up
and slide it under the securing tabs.
4. Press the battery into the connector until it snaps into place.
Figure 69 Installing system battery
To return the node to operation, perform the following steps:
Procedure
1. Power on the server.
2. While the system is booting, press F2 to enter System Setup.
3. Ensure that the battery is operating properly.
4. Select System BIOS
5. Enter the correct time and date in the System Time and System Date fields,
respectively.
6. Exit System Setup.
Miscellaneous Settings.
>
Verify the battery and reset the time and date
Hardware FRU procedures
149