Install The Hba330 Controller; Removing The Sas Hba Controller - Dell EMC VxFlex Ready Node R840 Manual

Hardware FRU procedures

Install the HBA330 controller

VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual
138
Figure 64 Removing the SAS HBA controller
a. SAS cables (2)
b. SAS cable connectors (2)
c. SAS HBA PCIe connector
d. PCIe connector on the system board
e. SAS HBA controller
4.
Before you begin
Follow all safety guidelines.
Procedure
1. Select the appropriate PCIe slot.
2. Align the connector on the controller with the PCIe slot on the system.
Note
To avoid damage to the controller, hold the controller by its edges only.