Install M.2 Modules On The Faulted Boss Card - Dell EMC VxFlex Ready Node R840 Manual

Hardware FRU procedures

Install M.2 modules on the faulted BOSS card

VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual
64
Figure 13 Installing the BOSS card in expansion card riser 1
Install the M.2 modules that were removed from the replacement BOSS card on the
faulted BOSS card.
Before you begin
Follow all safety guidelines.
Procedure
1. Align the M.2 module connectors with the connectors on the BOSS card.
2. Tilt the M.2 module downwards until the module is seated firmly on the card.
3. Tighten the screw that secures the M.2 module on the BOSS card.