Hardware Fru Procedures - Dell EMC VxFlex Ready Node R840 Manual

CHAPTER 4

Hardware FRU procedures

This section explains how to perform the hardware steps in the FRU procedures that
also require steps involving VxFlex OS.
You are referred to the relevant section of the VxFlex Ready Node Field Replacement
Unit Software Guide for the software steps for replacing the system component.
Important information before performing a FRU
l
Replacing the BOSS
l
Replacing drives.................................................................................................66
l
Replacing system memory
l
Replacing the hard drive
l
Replacing cooling fans........................................................................................ 91
l
Replacing an expansion card or expansion card
l
Replacing the GPU card
l
Replacing an M.2 SSD
l
Replacing network cards................................................................................... 119
l
Replacing the processor and heat
l
Replacing the storage controller
l
Replacing the system
l
Replacing the system
l
Replacing power supply
l
Replacing the power interposer
l
Replacing a control
l
card...................................................................................58
modules....................................................................74
backplane.................................................................... 81
................................................................................... 112
module...........................................................................116
sink..............................................................126
card............................................................... 136
board..............................................................................140
battery........................................................................... 147
units........................................................................... 150
board.............................................................. 153
panel.................................................................................. 157
procedure............................... 56
riser..........................................95
Hardware FRU procedures
55