Uefi Iscsi Settings Screen Details - Dell EMC VxFlex Ready Node R840 Manual

Integrated devices
Note
If your operating system begins to load before you press F2, wait for the system
to finish booting, and then restart the server and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Network Settings.
Network Settings screen details
The Network Settings screen details are explained as follows:
UEFI PXE Settings
Enables you to control the configuration of the UEFI PXE device.
PXE Device n (n = 1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created
for the device.
PXE Device n Settings(n = 1 to 4)
Enables you to control the configuration of the PXE device.
UEFI HTTP Settings
Enables or disables the device. When enabled, a UEFI HTTP boot option is
created for the device.
HTTP Device n Settings (n = 1 to 4)
Enables you to control the configuration of the HTTP device.
UEFI iSCSI Settings
Enables you to control the configuration of the iSCSI device.
Table 2 UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Use the Integrated Devices screen to view and configure the settings of all
integrated devices, including the video controller and USB ports.
CAUTION
Changing the default settings may make the node unusable. Dell EMC
recommends only making changes under the direction of Dell EMC tech support.
Managing basic system settings using the system firmware
Description
Specifies the name of the iSCSI initiator in
IQN format.
Enables or disables the iSCSI device. When
disabled, a UEFI boot option is created for the
iSCSI device automatically. This is set to
Disabled
by default.
Enables you to control the configuration of
the iSCSI device.
System BIOS
37