Dell EMC VxFlex Ready Node R840 Manual page 28

Managing basic system settings using the system firmware
Memory Settings
VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual
28
System Service Tag
Specifies the system service tag.
System Manufacturer
Indicates the name of the original equipment manufacturer (OEM).
System Manufacturer Contact Information
Indicates the OEM's contact information.
System CPLD Version
Specifies the current version of the system's complex programmable logic device
(CPLD) firmware.
UEFI Compliance Version
Specifies the UEFI compliance level of the system firmware.
The Memory Settings screen allows you to view all the memory settings and enable
or disable specific memory functions, such as system memory testing and node
interleaving.
View memory settings
To view memory settings, perform the following steps:
Procedure
1. Turn on or restart the server.
2. Press F2 immediately after you see the following message:
F2 = System Setup
Note
If the operating system begins to load before you press F2, wait for the system
to finish booting, and then restart the server and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Memory Settings details
The Memory Settings screen details are explained as follows:
System Memory Size
Specifies the size of the system memory.
System Memory Type
Specifies the type of memory installed in the system.
System Memory Speed
Specifies the system memory speed.
System Memory Voltage
Specifies the system memory voltage.