Applying Thermal Grease On Top Of The Processor - Dell EMC VxFlex Ready Node R840 Manual

Hardware FRU procedures
VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual
132
Figure 59 Applying thermal grease on top of the processor
5. Place the heat sink on the processor and push down on the base of the heat
sink until the bracket locks onto the heat sink.
Note
Ensure that the two guide pin holes on the bracket match the guide holes on
l
the heat sink.
Do not press on the heat sink fins.
l
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1
l
indicator on the bracket before placing the heat sink onto the processor and
bracket.