Dell EMC VxFlex Ready Node R840 Manual page 101

Card type Card
priority
12200
12300
12400
12500
12600
12700
12800
12900
13000
13100
Remove the expansion card from the expansion card riser
Table 10 x16 PCIe riser 1+ x16 PCIe riser 2 configuration (continued)
Slot priority Riser
height
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
Integrated None
Slot
The procedure to remove the expansion card from the riser is identical for all risers.
This procedure should also be used when removing a NIC from a PCIe slot.
Before you begin
Follow all safety guidelines.
Note
The parent hardware offers a variety of risers so the images below may not reflect
what is in this VxFlex solution.
Procedure
1. Open the black expansion card latch on the riser.
2. Open the blue card holder latch on the riser.
3. Hold the expansion card by its edges, and pull the card until the card edge
connector disengages from the connector on the riser.
Maximum Card height Card length Maximum
number of
cards
supported
1 None
1 None
1 None
1 None
1 None
1 None
1 None
1 None
1 None
1 None
Expansion cards and expansion card risers
Hardware FRU procedures
PCIe width
supported
rNDC x8
rNDC x4
rNDC x8
rNDC x8
rNDC x8
rNDC x8
rNDC x8
rNDC x8
rNDC x8
rNDC x8
101