Removing The Filler Bracket - Dell EMC VxFlex Ready Node R840 Manual

Hardware FRU procedures
VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual
110
Figure 46 Removing the filler bracket
Note
Store the filler bracket for future use. Filler brackets must be installed in empty
expansion card slots to maintain FCC certification of the system. The brackets
also keep dust and dirt out of the system and aid in proper cooling and airflow
inside the system.
3. Holding the card on the edges, align the card with the expansion card connector
on the system board.
4. Press the expansion card firmly into the expansion card connector on the
system board until the card is fully seated.
5. Close the blue expansion card retention latch.