Dacor DOC30M977D User Manual page 138

Troubleshooting
Symptom
Optitray
While turning, the
optitray comes out
of place or stops
turning.
The turn table drags
while turning.
The turn table
rattles while turning
and is noisy.
138 English
NQ9300M_MOD_DOC30M977D_DE68-04463A-01_EN.indd 138
Cause
There is no roller ring, or the
roller ring is not properly in
place.
The roller ring is not properly
in place, there is too much food,
or the container is too large
and touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
Action
Install the roller ring and then
try again.
Adjust the amount of food. Do
not use containers that are too
large.
Remove any food residue stuck
to the bottom of the oven.
5/2/2017 4:00:09 PM