Page 2
UNIT CONTROL Flat aluminum (Graphite or SILVER) HANDLE Flat aluminum (Graphite or SILVER) GLASS Smog glass, Black printing with silver logo (Transparency 33%)
Page 3
PLANNING CHECK PROCESS ② Plan the cutout Width and Depth ① Combi oven configuration · depending on install method (Standard or Flush install) ③ Plan the cutout Height ④ Check for interference with · depending on install method other appliances and configuration ·...
Page 4
① Combi oven configuration MW Combi Double Oven Width 30”(Lower oven) Control Panel Silver or Graphite Aluminum Handle Silver or Graphite Aluminum MW Combi Double Oven DOC30M977DS (Silver) DOC30M977DM (Graphite)
② Plan the cutout Width and Depth ③ Plan the cutout Height · depending on install method · depending on install method and (Standard or Flush install) configuration It is important to observe the specified dimensions of the installation cutout for a trouble- free installation of the appliance.
Page 6
④ Check for interference with other appliances ⑤ Check proper location for · Allow a min. 22” for clearance the electrical outlet when door is open ■ Combi Speed Oven_Standard...