Configuring the Ports,
Configuring the Serial Ports
Continued
To configure the serial ports listed in Table 6-9, complete the following steps:
1.
From the 4190 Programmer Screen, select the File Hardware Config menu
options. The system displays the Hardware Configuration screen.
2.
Use the selections in Table 6-9 to configure the port fields displayed on the
screen.
Table 6-9. Port Selection Settings
Ports
No ports used
Port A
Ports A & B
6-8
firealarmresources.com
Selection
NONE
Select RS-232 for port A and NONE for Port B
Select RS-232 for both ports