Installing Cards and Jumpers
Touchscreen Controller Card
Inserting and Connecting
Cards in the GCC
Ensure that the Touchscreen Controller Card jumpers (P/N 2201 printed on card)
are set as listed in Table 6-14.
Table 6-14. Touchscreen Controller Card Jumper Positions
Jumper
J0
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
This section explains how to insert cards and connect the cables to the GCC
Desktop Models 4190-8102 and 4190-8103. Table 6-15 lists the correct slot
positions in the GCC backplane
Table 6-15. GCC Desktop Models Card Slot Positions
Card
Controller Card
Network Card
6-11
firealarmresources.com
Position
N
N
N
N
N
N - Duratouch
Y - Accutouch
N
Y
N
N
N
Slot #
Slot #1 (Leftmost)
Install the first Network card in
Slot #3 and (if applicable), each
additional Network card (up to 3)
in slots 4 through 6.
Continued on next page