Table of Contents
Advertisement
Installing the Software,
Installing the Optional Tape
Drive Software from Floppy
Disk (All Windows systems)
Continued
This section describes how to install the tape drive software for GCCs equipped
with tape drives.
Note:
Tape drives are not supported in the Run-time software.
1.
Insert the IOMEGA Tape Drive Software Driver Disk into the GCC floppy
drive.
2.
From the Windows Program Manager, select File|Run. The system displays
the Run box.
3.
In the Run box, type A:install and select OK. Follow the prompts displayed
on the screen and use the settings listed in Table 3-4.
Table 3-4. Tape Drive Software Installation Settings
Field
Screen Selection
Backup Install
Personalize your Company
Tape Configuration
Tape Configure
Configuration Test
DMA Test Complete
Alert
Tape Compatibility Test
Compare Complete
Compatibility Test Successful
Configuration Test
Backup AUTOSTART
Update AUTOEXEC.BAT
AUTOEXEC.BAT
modifications
Update CONFIG.SYS
CONFIG.SYS modifications
Configure
Backup Install
3-9
firealarmresources.com
Setting/Action
Color
Accept Default
Your Name
Your Company
Start Test
OK
Start Configuration Test
OK
Insert Tape and select Continue
Backup
Start Test
OK
OK
OK
NO
OK
Save Changes
OK
Save Changes
Save
Reboot
Continued on next page
Advertisement
Table of Contents
Need help?
Do you have a question about the 4190 Graphical and is the answer not in the manual?
Questions and answers