System Requirements
System Requirements for
Windows 95 Computers
System Requirements for
Windows 3.1 Computers
In order for a Microsoft® Windows 95-based computer platform to operate
properly as a GCC, it must meet or exceed the following minimum hardware
requirements.
•
An IBM-compatible personal computer with a Pentium Processor
•
850 Mb (or greater) Hard Drive
•
3.5 inch, high-density floppy disk drive
•
1 parallel port
•
1 serial port
•
16 Mb RAM (32Mb recommended)
•
SVGA graphics controller
•
Monitor
•
A mouse, touchscreen monitor, or both
•
A 733-794 Serial Download Cable
•
A 740-907 Software Key
•
If an SDACT is installed, you will need the SDACT Programmer
software (Part No. 553-807).
In order for a Microsoft® Windows 3.1-based computer platform to operate
properly as a GCC, it must meet or exceed the following minimum hardware
requirements.
•
33 MHz 486 Central Processing Unit (CPU)
•
85 Mb hard drive
•
3.5 inch, high-density floppy disk drive
•
1 parallel port
•
1 serial port
•
8 Mb RAM
•
SVGA graphics board
•
Monitor
•
A mouse, touchscreen monitor, or both
•
A 733-794 Serial Download Cable
•
A 740-907 Software Key
2-2
firealarmresources.com
Continued on next page