Disassembling Rear Axle - Kubota L4400 Workshop Manual

L4400 , WSM

[2] DISASSEMBLING REAR AXLE

Tractor Manuals Scotland
1. Remove the ball bearing (9) with a puller.
2. Remove the stake of lock nut (4).
3. Secure the rear axle (1) in a vise and remove the lock nut.
4. Take out the gear (8) and spacer (7).
5. Tap out the rear axle (1).
(When reassembling)
• Apply grease to the oil seal (2) and install it.
• Replace the lock nut with new one, and after tightening it to
specified torque, stake it firmly.
• Assemble the oil seal (2) with correct direction. (See figure
above (A) portion.)
Tightening torque
Tractor Manuals Scotland - Please Do Not Copy
4-S6
(1) Rear Axle
(2) Oil Seal
(3) Rear Axle Case
(4) Lock Nut
(5) Internal Snap Ring
(6) Ball Bearing
(7) Spacer
(8) Gear
(9) Ball Bearing
196 to 245 N·m
Lock nut 20 to 25 kgf·m
145 to 181 ft-lbs
REAR AXLE
W10115940
W10116810
KiSC issued 07, 2007 A