Disassembling Rear Axle Case - Kubota B2301 Workshop Manual

B2301, B2601, WSM

(2) Disassembling Rear Axle Case

Rear Axle Case
1. Remove the brake rod (7) and right side fender (2).
2. Remove the 3-point hitch delivery pipe 2 (5) and return hose (6).
3. Remove the pipe clamps and 3-point hitch delivery pipe 1 (3).
4. Remove the front loader valve pipes (8).
5. Remove the loader valve assembly (9).
6. Remove the rear axle case (1).
(When reassembling)
• Do not damage the O-rings of front loader valve pipes and
delivery pipes.
• Apply liquid gasket (Three Bond 1206D or equivalent) to joint
face of the rear axle case and differential gear case after
eliminating the water and oil.
Front loader valve pipe joint
bolt
3-point hitch delivery pipe 1
joint bolt
3-point hitch delivery pipe 2
Tightening torque joint bolt (Front loader
valve side)
3-point hitch delivery pipe 2
joint bolt (Hydraulic cylinder
case side)
Rear axle case mounting
screw
(1) Rear Axle Case
(2) Fender
(3) 3-Point Hitch Delivery Pipe 1
(4) Differential Lock Rod
(5) 3-Point Hitch Delivery Pipe 2
Differential Lock Shift Fork, Differential Lock Clutch (Right
Side Only)
1. Remove the spring (1).
2. Draw out the differential lock shift fork (2) and differential lock
clutch (3).
(1) Spring
(2) Differential Lock Shift Fork
3-S4
REAR AXLE
48 to 70 N·m
4.9 to 7.1 kgf·m
36 to 51 lbf·ft
48 to 70 N·m
4.9 to 7.1 kgf·m
36 to 51 lbf·ft
48 to 70 N·m
4.9 to 7.1 kgf·m
36 to 51 lbf·ft
50 to 60 N·m
5.1 to 6.1 kgf·m
37 to 44 lbf·ft
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(6) Return Hose
(7) Brake Rod
(8) Front Loader Valve Pipe
(9) Loader Valve Assembly
9Y1211156RAS0005US0
(3) Differential Lock Clutch
9Y1211156RAS0006US0
KiSC issued 11, 2014 A