Kubota L4400 Workshop Manual page 17

L4400 , WSM
Tractor Manuals Scotland
• Securely clamp, being careful not to damage wiring.
(1) Clamp
• Wind Clamp Spirally
(2) Wire Harness
• Clamp wiring so that there is no twist, unnecessary sag, or
excessive tension, except for movable part, where sag be
required.
(1) Wiring
(2) Clamp
• In installing a part, take care not to get wiring caught by it.
(1) Wiring
• After installing wiring, check protection of terminals and clamped
condition of wiring, only connect battery.
(1) Cover
• Securely Install Cover
Tractor Manuals Scotland - Please Do Not Copy
G-4
G GENERAL
(3) Clamp
(4) Welding Dent
W10114580
(A) Correct
(B) Incorrect
W10115870
(A) Incorrect
W10116700
W10117350
KiSC issued 07, 2007 A