Kubota L4400 Workshop Manual page 161

L4400 , WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Steering Wheel and Rear Bonnet
1. Remove steering wheel (1) with steering puller.
2. Remove throttle grip (2).
3. Disconnect hourmeter cable from engine.
4. Remove meter panel (3).
5. Disconnect 4P connector (5) to main switch.
6. Disconnect 8P connector (6) to combination switch.
7. Disconnect 4P connector to starter relay (7), 4P connector to
OPC timer (8), 8P connector to flasher (hazard) unit (9), 4P
connector to glow (Key stop solenoid) relay (10).
8. Disconnect fuel tank wiring (11).
9. Remove rear bonnet (4).
(When reassembling)
Tightening torque
(1) Steering Wheel
(2) Throttle Grip
(3) Meter Panel
(4) Rear Bonnet
(5) 4P Connector (Main Switch)
(6) 8P Connector (Combination Switch)
(7) 4P Connector (Starter Relay)
2-S17
48.0 to 55.9 N·m
Steering wheel mounting
4.9 to 5.7 kgf·m
nut
35.4 to 41.2 ft-lbs
(8) 4P Connector (OPC Timer)
(9) 8P Connector (Flasher (Hazard)
Unit)
(10) 4P Connector (Glow (Key Stop
Solenoid) Relay)
(11) Fuel Tank Wiring
(12) Steering Wheel Mounting Nut
CLUTCH
KiSC issued 07, 2007 A