Kubota L4400 Workshop Manual page 175

L4400 , WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Clutch Valve Spool
1. Remove the oil seal and the external snap ring (5).
2. Draw out the spool (6).
3. Make a marks on the spool (6) and the lever (4).
4. Remove the spring (3) and tap out the spring pin (7), and then
remove the lever (4).
(When reassembling)
• Replace the oil seal (1).
• Assemble the spool (6) and lever (4) with aligning the marks.
(1) Oil Seal
(2) Clutch Valve Case
(3) Spring
(4) Lever
2-S31
CLUTCH
(5) External Snap Ring
(6) Spool
(7) Spring Pin
KiSC issued 07, 2007 A