Kubota L4400 Workshop Manual page 101

L4400 , WSM
Tractor Manuals Scotland
Hydraulic Pipe
1. Disconnect the right delivery hose (3) and the left delivery hose
(4).
Tightening torque
(1) Main Delivery Hose
(2) Return Hose
(3) Right Delivery Hose
(4) Left Delivery Hose
(5) Relief Valve Plug (Engine Side)
Propeller Shaft (4WD only)
1. Slide propeller shaft front cover (1) and rear cover (2) after
removing screws (3).
2. Tap out spring pins (4), (5), slide couplings (6), (7), and then
remove propeller shaft together with propeller shaft covers.
(When reassembling)
• Apply grease to splines of propeller shaft.
• Tap in spring pin (4), (5) as shown in figure.
(1) Propeller Shaft Front Cover
(2) Propeller Shaft Rear Cover
(3) Screw
(4) Spring Pin
Tractor Manuals Scotland - Please Do Not Copy
1-S26
46.2 to 50.9 N·m
Main delivery hose
4.8 to5.2 kgf·m
retaining nut
34.4 to 37.6 ft-lbs
24.5 to 29.4 N·m
Turning delivery hoses
2.5 to 3.0 kgf·m
retaining nut
18.1 to 21.7 ft-lbs
(A) Steering Controller Viewing from
the Bottom
(5) Spring Pin
(6) Coupling
(7) Coupling
ENGINE
W1043130
W1043855
KiSC issued 07, 2007 A