Kubota L4400 Workshop Manual page 207

L4400 , WSM
Tractor Manuals Scotland
Shaft Assemblies (Continued)
1. Remove Lo-reverse gear shaft assembly (4).
2. Remove Lo-reverse fork rod (3), front wheel drive shift lever (5).
(1) Hi-shift Fork Rod
(2) Pinion Gear Shaft
(3) Lo-reverse Fork Rod
(4) Lo-reverse Gear Shaft
Differential Lock Shift Fork
1. Tap out the left side spring pin (4).
2. Remove the cotter pin and take out the clevis pin (3).
3. Draw out the differential lock fork shaft (1) and take out the
differential lock shift fork (2).
(When reassembling)
• Apply grease to the left and right oil seals on the transmission
case.
• Insert the clevis pin (3) form the top and install the washer and
cotter pin.
• Tap in the spring pin (4) so that its split portion a may face
outward as shown in the figure.
(1) Differential Lock Fork Shaft
(2) DIfferential Lock Shift Fork
(3) Clevis Pin
(4) Spring Pin
Tractor Manuals Scotland - Please Do Not Copy
3-S28
TRANSMISSION
(5) Front Wheel Drive Shift Lever
(6) PTO Gear Shaft Assembly
(7) Front Wheel Drive Gear Shaft
Assembly
W1021656
a : Split Portion
W25836914
KiSC issued 07, 2007 A