Engine Stop Solenoid - Kubota L4400 Workshop Manual

L4400 , WSM

(7) Engine Stop Solenoid

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Connector Voltage
1. Disconnect the 2P connector from engine stop solenoid.
2. Turn the main switch key to the "ON" position.
3. Measure the voltage between the terminal 1, terminal 2 and
body.
4. If the voltage differs from the battery voltage, the wiring harness
or main switch is faulty.
Voltage
(1) Terminal 1
(2) Terminal 2
Stop Solenoid Coil
1. Disconnect the 2P connector from engine stop solenoid.
2. Measure the resistance between the terminal 1, terminal 2 and
body.
3. If resistance differs from the factory specifications, the coil is
faulty.
Resistance
(1) Terminal 1 (Pulling Coil)
9-S17
ELECTRICAL SYSTEM
Terminal 1 - Body
Approx. battery voltage
Terminal 2 - Body
(A) Engine Stop Solenoid
(B) 2P Connector
Approx. 0.375 Ω
Terminal 1 - Body
Approx. 15.6 Ω
Terminal 2 - Body
(2) Terminal 2 (Pulling Coil)
W1096779
W1098612
KiSC issued 07, 2007 A