Disassembling And Assembling - Kubota L4400 Workshop Manual

L4400 , WSM

[3] DISASSEMBLING AND ASSEMBLING

Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
PTO Clutch Valve, PTO Clutch Holder
1. Remove PTO clutch valve (1).
2. Remove PTO clutch holder (6) together with PTO clutch pack (5)
by using two jack screw M8 (3).
3. Tap out 18T gear shaft (7).
4. Tap out 23T gear shaft (8).
(When reassembling)
• Apply a small amount of transmission fluid to the O-ring.
• Install oil pipe (2) to the side hole of PTO clutch holder (6) firmly.
Tightening torque
(1) PTO Clutch Valve
(2) Oil Pipe
(3) Jack Screw M8
(4) Mid Case
2-S23
23.5 to 27.4 N·m
PTO clutch valve mounting
2.4 to 2.8 kgf·m
screw
17.4 to 20.2 ft-lbs
77.5 to 90.2 N·m
PTO clutch holder
7.9 to 9.2 kgf·m
mounting screw
57.1 to 66.5 ft-lbs
(5) PTO Clutch Pack
(6) PTO Clutch Holder
(7) 18T Gear Shaft
(8) 23T Gear Shaft
CLUTCH
W1031115
KiSC issued 07, 2007 A