Kubota L4400 Workshop Manual page 218

L4400 , WSM
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
Adjustment
1. Adjust (shorten) the turnbuckle (H) (3) so that the length (A)
becomes 1 to 5 mm (0.04 to t0.2 in.).
Length of the rod
(B)
2. Repeat shifting in a sequence of (H → L → H → R → H) and
confirm the shifting is possible.
1) If shifting to the directions of left and right (H → L and L → H)
is possible, the adjustment has been completed.
2) When shifting to the directions of left and right is not possible,
this is because the drift (C) in the forward and backward of the
arm (H) (2) and arm (L - R) (4) in the neutral position has become
too large. So make adjustment to the turnbuckle (L - R) (5) to
correct the drift.
3) Again, check by shifting and complete the adjustment.
NOTE
• Lock securely the lock screws of adjusted turnbuckle to
prevent from becoming loose.
Tightening torque
(1) Range Gear Shift Lever
(2) Arm (H)
(3) Turnbuckle (H)
(4) Arm (L - R)
(5) Turnbuckle (L - R)
3-S39
85 mm
Reference value
3.35 in.
39.2 to 45.1 N·m
Turnbuckle (3) (5) lock
4.0 to 4.6 kgf·m
screw
28.9 to 33.3 ft-lbs
B : Length of the rod
C : Drift of arm in forward and
backward directions
TRANSMISSION
W10785670
KiSC issued 07, 2007 A