Steering Cylinder (2Wd) - Kubota L4400 Workshop Manual

L4400 , WSM

(3) Steering Cylinder (2WD)

Tractor Manuals Scotland
Front Wheel, Cylinder Cover and Tie-rod
1. Place a disassembly stand under the front axle frame (4) and
support it with a jack.
2. Remove the front wheel and cylinder cover (3).
3. DiscoPull out the cotter pin and remove the tie-rod and slotted
nut.ct hour-meter cable from engine.
4. Disconnect the tie-rod (2) from knuckle arm (1).
(When reassembling)
• After tightening the tie-rod end slotted nut to the specified torque,
install a cotter pin as shown in the figure.
Tightening torque
(1) Knuckle Arm
(2) Tie-rod
Tractor Manuals Scotland - Please Do Not Copy
7-S12
137.3 N·m
Front wheel mounting nut 14.0 kgf·m
101.3 ft-lbs
49.0 to 68.6 N·m
Tie-rod end slotted nut 5.0 to 7.0 kgf·m
36.2 to 50.6 ft-lbs
(3) Cylinder Cover
(4) Front Axle Frame
STEERING
W1018652
KiSC issued 07, 2007 A