Kubota L4400 Workshop Manual page 274

L4400 , WSM
Tractor Manuals Scotland
Backlash between 11T Bevel Gear and 42T Bevel Gear
1. Place a strip of fuse to three spots on the 42T bevel gear (1) with
grease.
2. Fix the axle flange and front gear case.
3. Turn the axle.
4. Remove the axle flange from front gear case and measure the
thickness of the fuse with an outside micrometer.
5. If the backlash is not within the factory specifications, adjust with
shim (3).
Backlash between bevel
gear (2) and bevel gear
(1)
(Reference)
• Thickness of adjusting shims :
1.0 mm (0.039 in.)
1.4 mm (0.055 in.)
1.8 mm (0.071 in.)
2.2 mm (0.087 in.)
• Tooth contact : More than 35 %
(1) Bevel Gear
(2) Bevel Gear
Tractor Manuals Scotland - Please Do Not Copy
6-S22
0.15 to 0.35 mm
Factory spec.
0.006 to 0.014 in.
0.6 mm
Allowable limit
0.024 in.
1.2 mm (0.047 in.)
1.6 mm (0.063 in.)
2.0 mm (0.079 in.)
(3) Shim
FRONT AXLE
W1019582
KiSC issued 07, 2007 A