Kubota L4400 Workshop Manual page 166

L4400 , WSM
Tractor Manuals Scotland
Separating Mid Case from Transmission Case
1. Loosen and remove screws and nuts securing mid case (2) to
transmission case (3).
2. Separate mid case from transmission case (3).
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of mid case and transmission case after eliminate water, oil
and stuck liquid gasket.
Tightening torque
(1) Clutch Housing
(2) Mid Case
Separating Clutch Housing from Mid Case
1. Remove screws and nuts securing clutch housing to mid case.
2. Separate the clutch housing (1) from mid case (2).
(When reassembling)
• Replace the gasket with a new one.
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the clutch housing and mid case.
Tightening torque
(1) Clutch Housing
Tractor Manuals Scotland - Please Do Not Copy
2-S22
Mid case and transmission 102.9 to 117.6 N·m
case mounting screw and 10.5 to 12.0 kgf·m
nut 75.9 to 86.8 ft-lbs
39.2 to 49.0 N·m
Mid case and transmission
4.0 to 5.0 kgf·m
case mounting stud bolt
28.9 to 36.2 ft-lbs
(3) Transmission Case
102.9 to 117.6 N·m
Clutch housing and mid
10.5 to 12.0 kgf·m
case mounting nut
75.9 to 86.8 ft-lbs
77.5 to 90.2 N·m
Clutch housing and mid
7.9 to 9.2 kgf·m
case mounting screw
57.1 to 66.5 ft-lbs
39.2 to 49.0 N·m
Clutch housing and mid
4.0 to 5.0 kgf·m
case mounting stud bolt
28.9 to 36.2 ft-lbs
(2) Mid Case
CLUTCH
W1030573
W1030814
KiSC issued 07, 2007 A