Remove An Internal Component; Figure 71 Remove The Top Of The Case - Nortel BCM50 Installation And Maintenance Manual

206

Remove an internal component

Figure 71 Remove the top of the case

6 Lift the top of the case off of the BCM50 unit.
7 Continue with the next step,

Remove an internal component

Use one of the following procedures to remove the component:
• "Remove the hard disk" on page 207
• "Remove the fan" on page 208
• "Remove the Router card" on page 208
Warning: Protect the hardware components against damage from electro-static
discharge. Always wear a ground wriststrap before you handle components. Always
place the components in static-free container.
Replace an internal component
"Remove an internal component" on page 206.