Connect The Bcm50 System To The Lan And Wan; Figure 59 Overview Of Connecting Data Networking Cables To The Bcm50 System - Nortel BCM50 Installation And Maintenance Manual
Hide thumbs
Also See for BCM50:
- Configuration manual (568 pages) ,
- Installation and maintenance manual (335 pages) ,
- Administration manual (191 pages)
Table of Contents
Advertisement
Chapter 19
Connect the BCM50 system to the LAN and WAN
This section describes how to connect the LAN and WAN cables to the BCM50 system.
Figure 59
shows the steps required to connect the data networking cables to the BCM50 system.
Figure 59 Overview of connecting data networking cables to the BCM50 system
Refer to the following sections for information on connecting the cables to the BCM50 system:
•
"Connect the BCM50 to the LAN" on page 172
•
"Connect the BCM50 to the WAN" on page 174
•
"Next step" on page 175
Connect the BCM50 system to the LAN and WAN
171
Advertisement
Table of Contents
