Figure 36 Attach The Bcm50 Unit To The Wallmount Bracket; Figure 37 Wallmount Lock In Lock Position - Nortel BCM50 Installation And Maintenance Manual

104 Install the BCM50 unit on the wall
3 Align the feet on the BCM50 unit with the four holes in the wallmount bracket (see

Figure 36 Attach the BCM50 unit to the wallmount bracket

4 Press the unit against the wallmount bracket and slide the unit down until it clicks in place.
5 Slide the wallmount lock to the left (lock position). See

Figure 37 Wallmount lock in lock position

6 Use the supplied screw to secure the wallmount lock in position.
7 Repeat steps 1 to 6 for each additional BCM50 unit you are installing.
Install the BCM50 units
Figure 37.
Figure 36).