116
Connecting the BCM50 Expansion Unit
Refer to the following sections for information on connecting the cables to the BCM50 system:
•
•
•
•
•
•
Connecting the BCM50 Expansion Unit
The BCM50 Expansion Unit connects to the BCM50 Main Unit using the expansion ports on the
front of the units.
and the BCM50 Expansion Unit.
Figure 44 Expansion ports
BCM50 Main Unit
BCM50 Expansion
Unit
If your BCM50 system does not have a BCM50 Expansion Unit, proceed to
supply using a UPS (optional)" on page
If your BCM50 system has a BCM50 Expansion Unit, perform the following procedure:
1
Locate the expansion cable that was supplied with the BCM50 Expansion Unit.
If you do not have the expansion cable, you can use a category 5e-compliant ethernet cable.
Connect the cables to the BCM50 system
Figure 44
shows the location of the expansion ports on the BCM50 Main Unit
Expansion
port 1
Expansion
port 2
117.
Expansion
port
"Connect the power