Chapter 16
Use Telset Administration to set the basic parameters
Telset Administration allows you to use a digital telephone or IP Phone with a two-line display to
set the BCM50 configuration parameters. The 7316E digital phone and the IP Phone 2004 can
both be used for this purpose.
You cannot set all the basic parameters using Telset Administration, therefore after configuring
the initial parameters you must use Element Manager to set the startup parameters. Refer to
"Configure the startup parameters" on page
Refer to the BCM50 Telset Administration Guide (N0xxxxxxx) for more information on Telset
Administration.
Figure 56
shows an overview of using Teslet Administration to set the basic parameters.
Figure 56 Overview of using Telset Administration
164.
Use Telset Administration to set the basic parameters
155