Next Step - Nortel BCM50 Installation And Maintenance Manual

200

Next step

Warning: Leakage currents
You must connect the power cord to a grounded outlet before connecting the
telephony and data networking cables to the system.
8
Use Element Manager to enable the MBM. Refer to BCM50 Administration Guide
(N0xxxxxxx) for more information on enabling a MBM.
Next step
Once you have connected the cables, you can test the system. Refer to
BCM50 system" on page 177
Replace a BCM50 Expansion Unit
for information about testing the BCM50 system.
"Test and troubleshoot the