Table of Contents
Advertisement
2.0 Marine Diagnostics
The screen will appear asking you to select the number of engines
installed on the boat. Press the 2 key for a twin installation.
Use the
or
configure. Then press the ENTER key.
The screen message will then ask you to confirm your selection.
Press the 1 key to confirm your choice.
Turning the key to off, then back to run, will force the ECM to update
the current engine location.
NOTE: See the appendix for additional installation examples.
Press
Available
To EXIT
92
1- Mercury Marine
PLEASE SELECT THE
NUMBER OF ENGINES
INSTALLED ON THE BOAT
1
2
THIS IS CURRENTLY A
STARBOARD OUTSIDE
ENGINE
PRESS 1 TO CONTINUE
DUAL ENGINE
>PRT
SELECT NEW LOCATION
AND PRESS ENTER
key to move the cursor to the location you wish to
YOU HAVE SELECTED A
PORT OUTSIDE
ENGINE
1=YES
THIS LOCATION IS NOW
A PORT OUTSIDE
ENGINE
TURN KEY OFF THEN
BACK TO RUN FOR ECM
TO ACCEPT LOCATION
PRESS MODE TO EXIT
5 SPECIAL FUNCTIONS
3
4
Press the 1 key.
STB
2=NO
Reference Manual
Advertisement
Table of Contents
