Keypad - Quicksilver SmartCraft Systems Reference Manual

1.0 Introduction
DDT FEATURES
b
a
d
f
c
g
e

Keypad

a- and Keys – Move through menus and move cursor up or down
b- and Keys – Move cursor left or right
c-F1/F2 Keys – Allows the user to perform special functions
d-ENTER Key – Enters your commands into the program
e-MODE Key – Takes you back to the previous menu or test mode
f-RECORD Key – Records data for review
g-HELP Key – displays additional information
(available on select ECM models only).
NOTE: If a screen message contains the word "ENTER", you must
press the ENTER key to accept the command you've keyed into the
DDT.
Reference Manual 11