Quicksilver SmartCraft Systems Reference Manual page 53

FUEL LEVEL % 38.0
SHIFT IN GEAR
LAKE/SEA TMP_F
LOAD %
MPRLY
MAP PSI 14.1
OIL LEVEL% 38.0
PORT TAB POS
AVAILABLE PWR% 10.0
RUN TIME 38.0
STAR TAB POS
TPI%
TRIM POSITION 38.0
COOL TMP STB _F 140
COOL TMP PRT _F 138
NOTE: Not all parameters are available on all engine models. See
glossary for further descriptions of data labels.
PRINT
Press
To EXIT
Press F2, 1
Reference Manual
2.0 Marine Diagnostics
1- Mercury Marine
The main fuel tank level % when the fault occurred.
The engine was in gear (or neutral) when the fault occurred.
57
The temperature of the lake/sea water when the fault occurred.
0.0
The engine load % when the fault occurred.
A value of zero indicates there was no request made to acti-
vate the main power relay. A value greater than zero indicates
0
that the main power relay was active.
The MAP pressure when the fault occurred.
The main oil tank level % when the fault occurred.
0.0
The position of the port trim tab when the fault occurred.
Available Engine Power % when the fault occurred.
The time at which the fault occurred.(ECM run time of 38 hr.s)
0.0 The position of the starboard trim tab when the fault occurred.
0.0
The TPI% (Demand %) when the fault occurred.
The trim position when the fault occurred.
The starboard coolant temp when the fault occurred.
The port coolant temp when the fault occurred.
4 HISTORY
51