Self Test - Quicksilver SmartCraft Systems Reference Manual

SELF TEST

The ECM diagnostic software has been enhanced to allow the user to
make use of new DDT and ECM features.
The Auto Self Test will activate all system actuators and scan all
sensors to determine if they are within the expected range. It is
advisable to disable the electric fuel pump(s) during the test. To
disable the electric fuel pump remove the fuse or unplug the
connector(s) to the pump(s). Make sure the Select Function menu
screen is displayed. Press the 1 key.
DISCONNECT POWER
TO HIGH PRESSURE
FUEL PUMP.
PRESS 1 TO CONTINUE
Press the 1 key
DO YOU WISH TO RUN
TEST WITH ANY SPARK
PLUGS IN CYLINDER?
1=YES 2=NO
Press the 1 key
Reference Manual
2.0 Marine Diagnostics
1-Mercury Marine
Select Function:
1-AUTO SELF TEST
2-MANUAL TEST
THIS IS A KEY ON
ONLY STATIC TEST.
PRESS 1 TO CONTINUE
PRESS MODE TO CANCEL
Press the 1 key
USE ONLY A RESISTOR
TYPE SPARK PLUG TO
VIEW EXTERNAL SPARK
CONTINUE? 1=YES 2=NO
IF MOTOR IS EFI AND
PLUGS ARE IN HEAD A
2=NO
BACKFIRE MAY OCCUR.
THIS CAN CAUSE AN
EXTERNAL FLAME IF
FLAME ARRESTOR IS
REMOVED.
Press the 1 key.
Press the key.
Press the key.
PURGE FUEL VAPORS
PRIOR TO TEST
PRESS 1 TO CONTINUE
PRESS MODE TO CANCEL
Press the 1 key
33