Electronic Throttle Control - Quicksilver SmartCraft Systems Reference Manual

ELECTRONIC THROTTLE CONTROL – ETC
Using the OUTPUT LOAD TEST function, you can exercise the ECM
and various output loads (ignition coils, injectors, pumps, horn etc.)
controlled by the ECM.
Make sure the SELECT FUNCTION menu screen is displayed on
the DDT. Press the 3 key.
The SELECT LOAD TEST screen will appear. Use the key to display
the additional screens and the
Press the 7 key.
The miscellaneous load test menu may consist of the Idle Air Control
(IAC), the Electronic Shift Control (ESC), Electronic Throttle Control
(ETC) or Knock if the engine is so equipped. To test the ETC press the
3 key.
Reference Manual
2.0 Marine Diagnostics
1- Mercury Marine
Select Function:
1-OIL PRIME
2-CYLINDER MISFIRE
3-OUTPUT LOAD TEST
Select Load Test:
7–MISCELLANEOUS
8–TACHOMETER
9–RELAYS
Select Load Test:
1-IDLE AIR CONTROL
2-ELECT SHIFT
3-ELECT THROTTLE
4-KNOCK
5 SPECIAL FUNCTIONS
to return to the previous screen.
81