Fuel Pump Load Test - Quicksilver SmartCraft Systems Reference Manual

FUEL PUMP LOAD TEST

Using the OUTPUT LOAD TEST function, you can exercise the ECM
and various output loads (ignition coils, injectors, pumps, horn, etc.)
controlled by the ECM.
Make sure that the SELECT FUNCTION menu screen is displayed on
the DDT. Press the 3 key.
The SELECT LOAD TEST screen will appear. Use the key to display
the additional screens and the
This test is run with key switch in run position only (engine off). To test
the fuel pump for mechanical activity press the 5 key.
NOTE: This test will run automatically once the user has entered fuel
pump test.
Press
Available
To EXIT
Reference Manual
2.0 Marine Diagnostics
1- Mercury Marine
Select Function:
1-OIL PUMP PRIME
2-CYLINDER MISFIRE
3-OUTPUT LOAD TEST
4-RESET BREAK-IN OIL
Select Load Test:
4-OIL PUMP
5-FUEL PUMP
6-HORN
LISTEN FOR FUEL PUMP
OPERATION DURING
THIS TEST.
CONTINUE? 1=YES 2=NO
Press the1 key.
ENGINE ISN'T RUNNING
DURING THIS TEST.
PRESS 1 TO CONTINUE
PRESS MODE TO CANCEL
Press the1 key.
5 SPECIAL FUNCTIONS
to return to the previous screen.
71