Table of Contents
Advertisement
2.0 Marine Diagnostics
FAULT SECONDS
Using the Fault Seconds function you can display the total amount of
time that an engine critical fault has occurred. Fault Seconds should
be cleared once the problem has been corrected. Additional fault
problems will also be stored in the Freeze Frame buffers for further
evaluation if required.
Make sure the Select Function menu screen is displayed. Press the
4 key.
The history menus will appear. Press the 1 key to view Fault History.
The select Fault history screen will appear.
If no faults are stored in the ECM a message indicating NONE will be
displayed. If data is stored in the ECM then a fault time list will appear.
Only engine critical data is recorded by the ECM. All other fault
information will be stored in the Freeze Frame buffers.
52
1- Mercury Marine
Select Function:
1-DATA MONITOR
2-FAULT STATUS
3-SYSTEM INFO
4-HISTORY
Select Function:
1-FAULT HISTORY
2-RUN HISTORY
3-CLEAR FAULT HISTORY
Select Fault Hist:
1-FREEZE FRAME
2-FAULT SECONDS
Press the 2 key
FAULT SECONDS
NONE
PRESS MODE TO EXIT
4 HISTORY
Reference Manual
Advertisement
Table of Contents
