6-Engine Location - Quicksilver SmartCraft Systems Reference Manual

ENGINE LOCATION
Engine location will allow the user to configure multi engine
installations within the SmartCraft network. All engines shipped from
the factory are ECM configured as a starboard outside engine. For
example, if a dual installation is desired, then the appropriate engine
ECM needs to be reprogrammed to an outside port engine. Doing this
will make sure the correct ECM data is transmitted to the correct set
of SmartCraft gauges.
There are 4 location configurations available:
1-Starboard
2-Port
3-Starboard inside
4-Port inside
Fig. 1 below shows a dual engine installation.
To change the engine location use the Special Functions menu, se-
lect choice 6-ENGINE LOCATION.
Reference Manual
2.0 Marine Diagnostics
1- Mercury Marine
PRT
Select Function:
4-RESET BREAK-IN
5-CHANGE FUEL OFFSET

6-ENGINE LOCATION

5 SPECIAL FUNCTIONS
STB (factory default)
PRT
STB2
PRT2
Fig. 1
STB
91