Table of Contents
Advertisement
2.0 Marine Diagnostics
Testing with the DDT is easy. The software program presents a series
of menus from which the technician selects tests or functions desired.
The software will communicate with the ECM and extract or monitor
data stored or processed by the ECM. In general, the functions
provided include; faults, events, data, data capture (recording) and file
management.
You can perform many different functions, depending on the features
that are available within the ECM.
a. Data Monitor – Display operating parameters that are being
received from the ECM.
b. Fault Status – Display the current state of engine actuators or
sensors.
c. System Info – Display the internal ID of an ECM.
d. History – Stored history within the ECM
e. Special Functions – Allows user to perform special test
functions as allowed by the ECM.
All of the menu functions available for the system selected will be
displayed. If an up or down arrow is also displayed on the screen,
press the
or
The Mainhead, Subhead, and/or Sub-subhead on the top of each
page describes the steps needed to follow on the menu structure to
arrive at the place on the DDT that is being described on that page.
Select a choice by pressing the corresponding number key.
28
OVERVIEW
key to see the additional screens available.
Main Menu
SmartCraft Monitor
1-Mercury Marine
2-Tool Setup
Reference Manual
Advertisement
Table of Contents
