Print - Quicksilver SmartCraft Systems Reference Manual

Print

Once data has been captured and saved to a file, the data may also
be sent to the printer. Printing of files can be done without the DDT
being connected to an ECM. This is done using a 12 volt power supply
and printing through the File Manager function.
To print captured data from the File Manager Menu, select the PRINT
option by pressing the 5 key. The Print File menu will appear.
Use the and keys to scroll through the list of files. When the desired
file is to the right of the > symbol on line 2, press the ENTER key to
select it.
The selected file will then be printed.
NOTE: Files can also be transferred to a PC and printed from there.
(See Personal Computer setup.)
Reference Manual
RECORD/PLAYBACK
File Manager:
3-DELETE
4-RENAME
5-PRINT
>Print File
>OG123456.DMO
>MLA2001.DMO
>150EFIMD.DMO
1.0 Introduction
584
1364
1364
23