Table of Contents
Advertisement
Chapter 6: Installing the Switch on a Wall
Installing a Plywood Base on the Wall
84
A plywood base is recommended when installing the switch on a wall that
has wooden studs. Refer to "Plywood Base for a Wall with Wooden Studs"
on page 83. Consult a qualified building contractor for installation
instructions for the plywood base. Refer to r The installation guidelines are
listed here:
Use a stud finder to identify the middle of studs and hot electrical
wiring in the wall.
Attach the base to two wall studs with a minimum of four screws.
The selected wall location for the base must provide sufficient
space from other devices or walls so that you can access the front
and back panels, and for adequate air flow for ventilation.
Wall Studs
Wall
Installing the Plywood Base to the Wall
Plywood
Base
4599
Advertisement
Table of Contents
