Table of Contents
Advertisement
Chapter 1: Overview
Features
x530DP Models
Twisted Pair
Ports
20
The Allied Telesis x530DP Series switches are stackable Gigabit, Layer 3
Ethernet switches. The following sections list the features:
Table 1 lists the basic features for the switch models.
10/100/1000T
Model
PoE+ Copper
x530DP-28GHXm
x530DP-52GHXm
Each switch model comes with one pre-installed fan (FAN10). The
FAN10R is an option and does not come pre-installed. The power supplies
(PWR150-AC, PWR150R-AC, PWR250-AC, PWR250-80(DC), PWR800-
AC or PWR1200-AC) and FAN10R must be purchased separately.
The x530DP Switches support the following PoE devices:
All copper ports on the switches support PoE+ IEEE 802.3at
Classes 0 to 4 devices (maximum 30.0W at the switch ports).
All copper ports on the x530DP-28GHXm Switch and ports 25 to
48 on the x530DP-52GHXm Switch support PoE++ IEEE 802.3bt
Classes 5 and 6 devices (maximum 60.0W at the switch ports).
Note
The maximum number of powered devices that the switches can
support simultaneously will depend on the power requirements of
the devices.
The 48 twisted pair ports on the x530DP-52GHXm switch have these
features:
Ports 1 to 40 support 10/100/1000Mbps operation
Ports 41 to 48 support 1/2.5/5Gbps operation
100 meters (328 feet) maximum operating distance per port
Auto-negotiation for speed
Half- and Full-duplex mode at 10/100Mbps
Full-duplex only at 1Gbps and higher speeds
MDI/MDI-X at 10/100Mbps
Table 1. Basic Features
10/100/1000T
PoE++ Copper
Ports
Ports
-
20
24
16
100/1G/2.5G/5G
SFP+
PoE++ Copper
Ports
Ports
4
4
8
4
Advertisement
Table of Contents
