Installation; Battery Installation - Alpha ESS SMILE5 Installation Manual

INSTALLATION

2.2 Installation
Figure 9 Unpacking the Inverter and Battery
Step 1 Remove the battery and inverter from the packaging box.

2.2.1 Battery Installation

Positive
Negative
Figure 10 Battery Positive
and Negative port
Step 2 Connect the power cable at the top, which are included in the parts list of SMILE5-BAT.
Figure 12 Assemble Battery Mounting Panel
Step 3 Assemble the battery mounting panel on the battery.
12
Figure 11 Battery Power Cable
Installation Diagram
M5*10 Screws
13
Figure 13 Battery Installation - Drill Holes
Step 4 Position the battery parallel to the wall and use a Φ8mm drill to drill holes to a depth of
about 70mm in the wall for subsequent fixation of the mounting plates.
WiFi Panel
Figure 14 WiFi Module Installation
Step 5 Remove the WiFi panel on the top and install the WiFi module (tool: T20 screwdriver,
torque: 1.6Nm). Please refer to section 5 configuration network instructions.
INSTALLATION
Drill φ8, depth about 70 mm