Alpha ESS SMILE5 Installation Manual page 22

EMS INTRODUCTION AND SET UP
> > > INV Gen. < < <
> Today:
29.1kWh
> > > Bat Gen. < < <
> Today:
13.8kWh
> > > PV Gen. < < <
> Today:
19.0kWh
> > > Grid Charge < <
> Today:
1.9kWh
> > > PV Charge < <
> Today:
13.1kWh
INV Gen. interface displays today's or total
electricity quantity generated from
SMILE5-INV.
Bat Gen. interface displays today's or total
electricity quantity discharged from the
battery.
PV Gen. interface displays today's or total
electricity quantity generated from the
PV-panels.
Grid Charge interface displays today's or
total electricity quantity battery charged
from the grid.
PV Charge interface displays today's or
total electricity quantity battery charged
from the PV-panels.
38 39
> > > Error Logs
1:
2018-02-02
Chg SPI Fault
> > Information
> SN:
AL20020YYMMXXXX
4.2.4 Setting
4.2.4.1 General Setting
> New Password
>
0 0 0
Step 1 Click setting and enter the
password.
The installation's password is a
four-digit password: 1111, after
four-digit password is correctly input,
you can enter into the main Setting
interface (administrator permissions).
> > > Function
> Solar
Battery
Grid
Step 3 Click Solar to set the Solar
relevant information.
EMS INTRODUCTION AND SET UP
< <
Error Logs interface displays the 10 latest
fault records of this device, including the
name of the fault and time of error.
16:48
<
Make sure all numbers in the information
menu are correct.
> > >
<
> Function
0
Safety
Step 2 Click Function to enter
function setting.
> > >
> On Grid Cap.
000000W
< < <
Step 4 Set on-grid capacity, storage
capacity and number of PV strings
(MPPT number).
Setting < < <
Solar < < <