Alpha ESS SMILE5 Installation Manual page 25

ONLINE MONITORING
05 CONFIGURATION NETWORK (WIFI OPTIONAL)
Please install the WiFi module. Download and install the app by scanning the QR code
below, and directly connect to this device by WiFi module.
Step 1 Open AlphaESS
app, click the "Wi-Fi
Configuration" button
and enter the WiFi
configuration interface.
Connect to Router System
the hotspot Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Open the Wi-Fi network list
Cancel
Step 3 If your mobile phone hasn' t connected to the system hotspot, please open the
Wi-Fi network list. Please find the hotspot named after the product SN in WLAN list then
enter the password 12345678 and connect to it. After the setting, please go back to app
and click "Next".
Connect to Router
the hotspot Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Login
Register
Next
Step 2 Please check your
mobile phone to see
whether it has connected
to the system hotspot.
44 45
Connect to
the hotspot
System
Configuration
Password
Step 4 Enter the WiFi account and password and then save it, and click "Next".
Connect to
the hotspot
On Grid PV Capacity (kW)
Grid Meter
PV Meter
Safety Regulations
Step 5 Set the basic parameters, and you can see the device details , click"Submit".
Safety Regulation Setting: AS4777.2 for Australia, VDE4105/11.18 for Germany,
CEI0-21 for Italy, G98/G99 for Britain, NRS097-2-1 for South Africa, RD1699 for Spain.
For other details please find in Section 9.2.
Note: If you haven't registered, please register first following the steps after down-
loading and installing the app.
Connect to
Router System
the hotspot
Configuration Configuration
Wi-Fi admin
Change
Enter the password
Submit
Router System
Connect to Router System
Configuration Configuration the hotspot Configuration Configuration
Runnig information System information
Running information
(kW)
S/N:AL2002220050002
Working Status: UPS
CT Meter
System Time:2020/05/29 16:54:46
PV Inverter Power(W): 0
CT Meter
Inverter Power(W): 47
Battery Power(W): 57.9
Grid Power(W): 0
Submit
OK
ONLINE MONITORING
Router System
Configuration Configuration
Successfully configured
Next
Connect to Router System
the hotspot Configuration Configuration
Runnig information System information
System information
S/N:AL4001019000000
Model: Storion-Senergy
Safety Regulations: AS4777
Battery Installed Capacity(kWh): 0.0
On Grid PV Capacity(kW): 5.8
Meter: 0
Inverter Version: V00.00
EMS Version: V1.03.25
BMS Version: V0.00
OK